Ready to give your Charger a performance boost? Installing a cold air intake is one of the easiest and most cost-effective mods you can do yourself. Not only will it increase horsepower and torque, but it’ll also give your engine a meaner growl. Let’s get that intake installed!

What You’ll Need

• Cold air intake kit (K&N and JLT are popular choices)
• Basic socket set and wrenches
• Flathead screwdriver
• Pliers
• About 1-2 hours of your time

Step-by-Step Installation

1. Prep Your Charger
   1. Park on a level surface and let the engine cool completely
   2. Disconnect the negative battery terminal
2. Remove the Stock Intake
   1. Locate the stock airbox and intake tube
   2. Disconnect the mass airflow sensor (MAF) connector
   3. Loosen the hose clamps on the intake tube
   4. Remove any bolts securing the airbox
   5. Carefully remove the entire stock intake assembly
3. Install the New Cold Air Intake
   1. Mount the new heat shield in place of the stock airbox
   2. Attach the new intake tube to the throttle body
   3. Connect the MAF sensor to the new intake tube
   4. Install the high-flow air filter onto the intake tube
4. Final Touches
   1. Double-check all connections and make sure everything is tight
   2. Reconnect the battery
   3. Start the engine and listen for any unusual noises

Tips for Success

• Take your time and don’t force anything
• Keep track of all bolts and small parts
• Consider taking pictures as you go for reference

Benefits You’ll Notice

After installation, you should feel:

• Improved throttle response
• A slight boost in horsepower (typically 5-15 hp)
• Better fuel economy
• A more aggressive engine sound

Remember, while a cold air intake is a great first mod, it’s just the beginning. Consider pairing it with a tune to really unlock your Charger’s potential.

Now get out there and enjoy that extra power and sweet intake sound. Your Charger will thank you for it!